1.75MM RED PLA (Polylactic Acid) 3D printer filament
3KG (6.6 POUNDS) or 10KG (22 POUNDS) 3D PRINTER FILAMENT
Made in the USA with 100% virgin materials. Meets quality standard of 1.75mm +/- .05mm in diameter and .03mm in roundness. Net Weight 1kg
All PLA colors are made from Nature Works 4043D
Reel | Hub (ID) | Flange Diameter (OD) | Traverse (width) |
3kg | 1.5" | 10.5" | 3.5" |
10kg | 1.5" | 14" | 8" |
SUGGESTED TEMPERATURE SETTINGS:
Hotend temp - 190-220 C
Bed temp- 0-70 C
Bed Treatment - Blue Painters Tape (no heat needed), Glue stick 70C
Meets quality standard of +/- .05mm
MSDS for PLA
Data sheet for PLA
ALL FILAMENT IS WOUND ONTO A STANDARD BLACK REEL, SHRINK WRAPPED 4mil WITH DESICCANT,
AND VACUUM SEALED TO ENSURE QUALITY.