1.75MM BLACK LOW WARP ABS (ACRYLONITRILE BUTADIENE STYRENE)
3KG (6.6 POUNDS) 3D PRINTER FILAMENT
MANUFACTURED WITH 100% VIRGIN MATERIALS IN USA
ALL ABS IS NOW MADE WITH PREMIUM RESIN!
With this Low Warp ABS, you will never have to worry about warping, cracking, or parts lifting from the bed. It contains an additive that mitigates shrinkage in ABS, while keeping all of the wonderful properties!
The benefits of Low Warping ABS include:
Higher strength and flexibility compared to PLA
Higher temperature resistance over PLA
Ease of printing even without enclosure or heated bed!
Virtually no shrinkage means great layer bonding and dimensional stability
Machinability allows for end-use parts
| Reel | Hub (ID) | Flange Diameter (OD) | Traverse (width) |
| 3kg | 1.5" | 10.5" | 3.5" |
| 10kg | 1.5" | 14" | 8" |
SUGGESTED TEMPERATURE SETTINGS:
Hotend - 230-235 degrees C
Bed - 90 degrees C
Bed Treatment - Glue stick or ABS slurry
Meets quality standard of +/- .05mm
MSDS for ABS
Data sheet for ABS
ALL FILAMENT IS WOUND ONTO A STANDARD BLACK REEL, SHRINK WRAPPED WITH DESICCANT,
AND VACUUM SEALED TO ENSURE QUALITY.
