After two years of research and hundreds of experimental formulas, ZillaGrip Bed Coating for Cold 3D Printing has been developed for printing of PLA, ABS, PETG, NYLON, PC, PP, and POM. Now you can print normal or exotic materials without the use of the heatbed. This is turning 3D printing upside down. Our bed coating is only heated to release the printed object. You get less printing problems because the heated bed is not involved during the print. You dont have to spend thousands on a large UPS (uninterupted power supply) or worry about a long print stopping for some reason and the print comes loose. Since it is the same coating for all of these materials, you can use different materials for separate objects at the same time. Also, because of the lack of a temperature gradient and the strong hold of ZillaGrip, delamination of the layers is minimized. The value of the energy saved by printing this way with our Deltazilla Printer is more than $150/month.