ZillaGrip Room Temperature 3D Print Coating Kit. Includes 4 oz ZillaGrip glass bed coating fluid, Silicone roller applicator, Removing Scraper, and razor blades with holder. This kit allows printing of PLA, ABS, PETG, Nylon, PolyCarbonate (PC), Polypropylene (PP) and Delrin (POM) at room temperature on a cold bed, No Heated Bed is Necessary. Just roll on the ZillaGrip liquid, let it dry, and you are ready to print. Heat the bed to remove a print more easily. You can use your heated bed control, a heatgun or a blowdryer. You can add Zillagrip to only those areas that need to be recoated--it sticks to itself. You will be printing Nylon and Polycarbonate like it was PLA. Truly Revolutionary Product.