1.75MM BLACK HIGH HEAT PLA
3KG (6.6 POUNDS) 3D PRINTER FILAMENT
High heat PLA made from Natureworks 3D850 PLA
Printed parts made from this PLA can be heat treated, which can obtain properties that exceed ABS. To achieve a heat treat on a printed part, submerge in water (or bake in oven) at 200F for up to 30 minutes.
-Manufactured in the USA using High Heat PLA resin. This material is a great substitute for normal PLA when greater heat resistance and impact strength is desired.
|Reel|| Hub (ID)||Flange Diameter (OD)||Traverse (width)|
SUGGESTED TEMPERATURE SETTINGS:
Recommended Print Conditions:
Extruder Temp: 200-220°C
Bed Temp: 0-70 C
Bed Treatment - Glue stick or ABS slurry
Meets quality standard of +/- .05mm
MSDS for PLA
Data sheet for PLA
ALL FILAMENT IS WOUND ONTO A STANDARD BLACK REEL, SHRINK WRAPPED WITH DESICCANT,
AND VACUUM SEALED TO ENSURE QUALITY.